Problem Types

Dipole type flow sound across a sharp edge
Flow Induced Noise Noise generating mechanisms and how the Lighthill analogy works
Claes Fredö at Qring Technology International AB shows a high performance vibration isolation setup at MaxLAB IV.
Vibration Isolation Things you need to know truly to get effective isolation
Torsion Vibration Measurement and Analysis of Flue Gas Fan
Torsion Vibration Measurement and Analysis of Flue Gas Fan Typically, torsion vibration is weakly coupled (in the XYZ direction) with axial vibration when the drive system is straight. It can be nearly impossible to detect torsion vibration from axial vibration measurement because of this weak coupling.
How a Piezocable is built up and some of the Piezocable merits.
Pulsation Measurement A discussion on penetrating and externally applied sensors
ABB Atom criteria for piping vibration risk
Piping Vibration Fatigue Risk Assessment Risk assessment criteria, application and limitations
Site Survey
Site Survey A Site Survey should be made before a laboratory decides on the best site. This example demonstrates how different ways of analysing a signal may affect the outcome of the survey .
Pipe displacement and Pressure drop at time of safety valve release.
What Causes Piping Vibration? A discussion on physical mechanisms that generate piping vibration
Shock Response for Equipment Response to Impulsive Loads
Shock Response for Equipment Response to Impulsive Loads Shock response is important for understanding equipment’s response to impulsive loads. such as a water hammer, travelling across road bumps or drops, shock pulses, and explosions.
Emergency Generators
Emergency Generators Typical problems and things to look out for to get a good installation
Reciprocating Pump Principle
Reciprocating Pumps Pump function principle, problem signs and countermeasures

Qring Technology International AB | Gamla Tanneforsvägen 18, 582 54, Linköping | VAT ID SE556873544201